Fujitsu SPARC Enterprise M5000 Ergänzendes Handbuch - Seite 25
Blättern Sie online oder laden Sie pdf Ergänzendes Handbuch für Server Fujitsu SPARC Enterprise M5000 herunter. Fujitsu SPARC Enterprise M5000 36 Seiten. Rci build procedure
Auch für Fujitsu SPARC Enterprise M5000: Merkmale Handbuch (30 seiten), Produkthinweise (44 seiten), Handbuch "Erste Schritte (4 seiten)
Seite drucken
7
On main unit A, execute the setrci -c set command to make the settings of the
host node.
Since main unit A is the first unit, host_no is 1.
XSCF> setrci -c set 1
The command completed successfully
8
On main unit B, execute the setrci -c set command to make the settings of the
host node.
Since main unit B is the second unit, host_no is 2.
XSCF> setrci -c set 2
The command completed successfully
9
On main unit A, execute the setrci -c initconfig command to configure the RCI.
XSCF> setrci -c initconfig
The command completed successfully
10
Execute the setrci -c addconfigcommand on main unit B to expand the RCI
configuration.
XSCF> setrci -c addconfig
The command completed successfully
11
Display the RCI status by executing the setrci -c stat command on main unit A.
XSCF> setrci -c stat
HOST
address 000101ff
Active
LIST
address pwr alm I/F sys-phase ctgry dev-cls sub-cls tm-out
000101ff OFF - ACT --
000102ff OFF - ACT --
003001ff OFF - ACT --
003002ff OFF - ACT --
The command completed successfully
12
Verify that all the RCI device in the RCI connection are incorporated.
C120-E361-04EN
host 0001 0b
-
host 0001 0b
-
disk 0400 04
-
disk 0400 04
-
1.3 RCI Setup
1-7