Fujitsu ScanSnap iScanner fi-6010N Handbuch "Erste Schritte - Seite 17

Blättern Sie online oder laden Sie pdf Handbuch "Erste Schritte für Scanner Fujitsu ScanSnap iScanner fi-6010N herunter. Fujitsu ScanSnap iScanner fi-6010N 45 Seiten. Network adf scanner
Auch für Fujitsu ScanSnap iScanner fi-6010N: Spezifikationen (2 seiten), Handbuch "Erste Schritte (21 seiten), Broschüre & Specs (2 seiten), Handbuch "Erste Schritte (21 seiten), Anweisungen zur Reinigung (2 seiten), Anweisungen zur Reinigung (2 seiten)

Seite drucken

Fujitsu ScanSnap iScanner fi-6010N Handbuch

Chapter 3

3.1 Logging in

Do not move or shake the

AUTION

scanner when it is turned on.

This can damage the rotating

hard disk drive and cause data to

be lost.

To set up the network connection, you must login as the

administrator. The user name and initial password for

the administrator are as follows:

User Name: admin

Password: password

1. Press the startup button.

After the system starts up, the "Language /

Keyboard Selection" screen appears.

After turning the power off, wait for at

ATTENTION

least 10 seconds before turning the

power back on again.

If LCD touch panel responses seem

HINT

out of alignment with the positions of

objects on the LCD screen, calibrate

the screen.

For details, refer to "Appendix A Cali-

brating the LCD Touch Panel" (page

19).

2. Select a language.

Select the desired language for the operating envi-

ronment. The default language is "English (US

Keyboard)".

Setting up for Network Use

Startup button

You can select whether or not to display

HINT

this screen again at the next start up. To

display the screen again, for "Show this

message at next start up?", press the

[Yes] button. To not display this screen at

next start up, press the [No] button.

To change the setting back to displaying

this screen at the next start up, login as

the administrator and for "Show the

"Language/Keyboard Selection" screen

at next start up?", press the [Yes] button

on the "Language/Keyboard Selection"

screen.

3. Press the [OK] button.

The "Login" screen appears.

If the language is changed in Step 2,

ATTENTION

the following screen appears.

The message is displayed in the

selected language.

Pressing the [OK] button restarts the

scanner, and the "Login" screen.

4. Enter the user name.

User name is case sensitive. Enter "admin" here.