Abacus Electric Evolve Sonix Benutzerhandbuch - Seite 7

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Sicherheitssystem Abacus Electric Evolve Sonix herunter. Abacus Electric Evolve Sonix 10 Seiten. Wireless gsm alarm

Seite drucken

1#0#

Deactivation* (all the sensors don´t work)

Switching on the warning tone for the

21#1#

activation of the external alarm

Switching on the warning tone for the

22#1#

activation of the internal alarm

Switching on the warning tone for the alarm

23#1#

deactivation

27#(00-

Alarm delay (10 seconds)

99)#

The delay cannot be set for the sensors that work continuously as e. g. the smoke sensor ot the SOS button

3#1#

Immediate sound signal

4#1#

Listening activation (the phone button)*

11#1#

Activation of siren during the alarm *

12#1#

Sending SMS during the alarm *

15#1#

Dialling the number during the alarm *

Deactivation of the relay connection by 3

16#1#

minutes during the alarm *

30##

Displaying the activation/deactivation state of each of the zones (only via the SMS commands)

31#--#

Change the password. Entering the new password (1-6 bit).

38#--#

Alarm activation for the zone (wireless zones: 1-16; wire zones: 21-23) Note: for each zone activation

Alarm deactivation for the zone (wireless zones: 1-16; wire zones: 21-23) Note: for each zone

39#--#

deactivation

50##

Displaying the numbers preset to the alarm main drive (controlling only via SMS)

51#--#

Phone number of the first group (0-15bit)

53#--#

Phone number of the third group (0-15bit)

55#--#

Phone number of the fifth group (0-15bit)

80##

Displaying the preset SMS

81#--#

The first group message (0-24bit)

83#--#

The third group message (0-24bit)

85#--#

The fifth group message (0-24bit)

87#--#

The seventh group message (0-24bit)

90##

Displaying the output state

91#1#

Output 1 setting to high

92#1#

Output 2 setting to high

93#1#

Allow the phone call (output 3)

94#1#

Relay setting to interconnect

95#1#

Set the alarm at opening input 1

96#1#

Set the alarm at opening input 2

97#1#

Set the alarm at opening input 3

Switching off the warning tone for the

21#0#

activation of the external alarm

Switching off the warning tone for the

22#0#

activation of the internal alarm

Switching off the warning tone for the alarm

23#0#

deactivation

28#(00-

Setting for delay (figure: 00-99)

99)#

3#0#

Sound turning off

4#0#

Listening turning off (the phone button)

11#0#

Turning off the siren during the alarm

12#0#

Not sending SMS during the alarm

15#0#

Just the alarm without dialling the numbers

Activation of the relay connection by 3

16#0#*

minutes during the alarm *

52#--#

Phone number of the second group (0-15bit)

54#--#

Phone number of the fourth group (0-15bit)

82#--#

The second group message (0-24bit)

84#--#

The fourth group message (0-24bit)

86#--#

The sixth group message (0-24bit)

91#0#

Output 1 setting to low

92#0#

Output 2 setting to low

93#0#

Forbid the phone call (output 3)

94#0#

Relay setting to disconnect

Set the alarm if the input line 1 is grounded

95#0#

(Gnd)*

Set the alarm if the input line 2 is grounded

96#0#

(Gnd)*

Set the alarm if the input line 3 is grounded

97#0#

(Gnd)*