Dell DL4300 Handbuch für den Einsatz - Seite 7
Blättern Sie online oder laden Sie pdf Handbuch für den Einsatz für Server Dell DL4300 herunter. Dell DL4300 33 Seiten.
Auch für Dell DL4300: Erste Schritte (2 seiten), Erste Schritte mit Ihrem System (2 seiten), Erste Schritte mit Ihrem System (2 seiten)
Seite drucken
To set up the DL Appliance hardware:
1.
Rack and cable the DL4300 system and storage enclosure(s).
2.
Turn on the storage enclosure(s) and then the DL4300 system.
Installing the appliance in a rack
If your system includes a rail kit, locate the Rack Installation Instructions supplied with the rack kit. Follow
the instructions to install the rails in the rack unit, the system, and the storage enclosure in the rack.
Setting the storage enclosure configuration switch
Set the storage mode for the storage enclosure to unified mode as indicated in the following figure.
NOTE: The configuration switch must be set before turning on the storage enclosure. Changing the
configuration mode after turning on the storage enclosure has no effect on enclosure configuration
until the system is power cycled. For more information, see the Dell Storage MD1400 Enclosures
Hardware Owner's Manual at dell.com/support/home.
Figure 1. Setting the PowerVault MD1400 storage enclosure configuration switch
1.
configuration switch
Connecting the storage enclosure to the system
Connect the data cable from the PowerEdge RAID Controller (PERC) installed in the Dell DL4300 system
to the primary Enclosure Management Module (EMM) SAS port of the storage enclosure.
7