Dell PowerVault DL4000 Handbuch für den Einsatz - Seite 7

Blättern Sie online oder laden Sie pdf Handbuch für den Einsatz für Lagerung Dell PowerVault DL4000 herunter. Dell PowerVault DL4000 22 Seiten. Setting up your dell powervault dl4000 backup to disk appliance
Auch für Dell PowerVault DL4000: Handbuch (28 seiten), Freigabemitteilung (11 seiten), Handbuch "Erste Schritte (10 seiten), Handbuch (4 seiten), Handbuch (2 seiten), Erste Schritte mit Ihrem System (2 seiten)

Seite drucken

Dell PowerVault DL4000 Handbuch für den Einsatz

Figure 1. Setting the PowerVault MD1200 Storage Enclosure Configuration Switch

1. configuration switch

Connecting The Storage Enclosure To The PowerVault DL4000 System

Connect the data cable from the PowerEdge RAID Controller (PERC) installed in the PowerVault DL4000 system to the

primary Enclosure Management Module (EMM) SAS In port of the storage enclosure. For more information, see the

figure below.

Figure 2. Connecting the SAS Cable From the PowerVault DL4000 System to the PowerVault MD1200 Storage Enclosure

Connecting The Cable Management Arm (Optional)

If the appliance includes a cable management arm (CMA), locate the CMA

CMA kit and follow the instructions to install the CMA.

Turning On The DL Backup To Disk Appliance

After cabling the appliance, turn on the MD1200 storage enclosure, and then turn on the PowerVault DL4000 system.

NOTE: It is recommended that you connect the appliance to an uninterrupted power supply (UPS) for maximum

reliability and availability. For more information, see your system's

Installation Instructions that shipped with the

Owner's Manual at dell.com/support/manuals.