Dell PowerVault DL4000 Deployment Manual - Page 7
Browse online or download pdf Deployment Manual for Storage Dell PowerVault DL4000. Dell PowerVault DL4000 22 pages. Setting up your dell powervault dl4000 backup to disk appliance
Also for Dell PowerVault DL4000: Handbook (28 pages), Release Note (11 pages), Getting Started Manual (10 pages), Manual (4 pages), Manual (2 pages), Getting Started With Your System (2 pages)

Figure 1. Setting the PowerVault MD1200 Storage Enclosure Configuration Switch
1. configuration switch
Connecting The Storage Enclosure To The PowerVault DL4000 System
Connect the data cable from the PowerEdge RAID Controller (PERC) installed in the PowerVault DL4000 system to the
primary Enclosure Management Module (EMM) SAS In port of the storage enclosure. For more information, see the
figure below.
Figure 2. Connecting the SAS Cable From the PowerVault DL4000 System to the PowerVault MD1200 Storage Enclosure
Connecting The Cable Management Arm (Optional)
If the appliance includes a cable management arm (CMA), locate the CMA
CMA kit and follow the instructions to install the CMA.
Turning On The DL Backup To Disk Appliance
After cabling the appliance, turn on the MD1200 storage enclosure, and then turn on the PowerVault DL4000 system.
NOTE: It is recommended that you connect the appliance to an uninterrupted power supply (UPS) for maximum
reliability and availability. For more information, see your system's
Installation Instructions that shipped with the
Owner's Manual at dell.com/support/manuals.
7