Dell Networking S4048 Handbuch "Erste Schritte - Seite 8

Blättern Sie online oder laden Sie pdf Handbuch "Erste Schritte für Schalter Dell Networking S4048 herunter. Dell Networking S4048 24 Seiten.
Auch für Dell Networking S4048: Installationshandbuch (44 seiten)

Seite drucken

1. Dell Networking os
2. Enter the Initial Configuration Information
3. Accessing the Console
4. Default Configuration
5. Accessing the System Remotely
6. Configuring the Enable Password

Figure 3. Two-Post Center-Mount Configuration

Four-Post Threaded Configuration

To install the Dell ReadyRails system using the four-post threaded configuration, follow these steps.

For this configuration, remove the flange ear castings from each end of the ReadyRails assemblies.

Use a Torx driver to remove the two screws from each flange ear and remove each casting. Refer to

item 1 of the following figure. Retain the castings for future rack requirements.

For each rail, attach the front and rear flanges to the post flanges with two user-supplied screws at

each end. Refer to item 2 of the following figure.

Install the Hardware