Miele DA 1160 Betriebs- und Installationsanleitung - Seite 16

Blättern Sie online oder laden Sie pdf Betriebs- und Installationsanleitung für Lüftungshaube Miele DA 1160 herunter. Miele DA 1160 32 Seiten. Built-under ventilation hood
Auch für Miele DA 1160: Informationen (4 seiten), Betriebs- und Installationsanleitung (32 seiten), Betriebs- und Installationsanleitung (40 seiten)

Cleaning and care

Changing a halogen lamp

^ Ensure the rangehood is

disconnected from the electricity

supply. To do this:

– switch off at the wall socket and

remove the plug, or

– remove the mains fuse, or

– remove the screw-out fuse (in

countries where this is applicable).

Exercise caution when changing

halogen lamps. They get very hot

during use and remain hot for some

time after being switched off.

Let them cool down before you

change them.

^ Remove the grease filters.

^ Slightly loosen the lamp's fastening

screw.

^ Slide the screw and the lamp down.

^ Tighten the screw again.

^ Turn the halogen lamp anti-clockwise

and pull it out.

Replace it with a lamp of the same

type: GU/GZ 10, 230 V, 50W.

^ Refit the lamp by reversing the steps

shown above. Please observe the

manufacturer's instructions.

^ Refit the grease filters.