Miele DA 1160 Petunjuk Pengoperasian dan Pemasangan - Halaman 16

Jelajahi secara online atau unduh pdf Petunjuk Pengoperasian dan Pemasangan untuk Kap Ventilasi Miele DA 1160. Miele DA 1160 32 halaman. Built-under ventilation hood
Juga untuk Miele DA 1160: Informasi (4 halaman), Petunjuk Pengoperasian dan Pemasangan (32 halaman), Petunjuk Pengoperasian dan Pemasangan (40 halaman)

Cleaning and care

Changing a halogen lamp

^ Ensure the rangehood is

disconnected from the electricity

supply. To do this:

– switch off at the wall socket and

remove the plug, or

– remove the mains fuse, or

– remove the screw-out fuse (in

countries where this is applicable).

Exercise caution when changing

halogen lamps. They get very hot

during use and remain hot for some

time after being switched off.

Let them cool down before you

change them.

^ Remove the grease filters.

^ Slightly loosen the lamp's fastening

screw.

^ Slide the screw and the lamp down.

^ Tighten the screw again.

^ Turn the halogen lamp anti-clockwise

and pull it out.

Replace it with a lamp of the same

type: GU/GZ 10, 230 V, 50W.

^ Refit the lamp by reversing the steps

shown above. Please observe the

manufacturer's instructions.

^ Refit the grease filters.