Miele DA 1160 작동 및 설치 지침 - 페이지 16

{카테고리_이름} Miele DA 1160에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele DA 1160 32 페이지. Built-under ventilation hood
Miele DA 1160에 대해서도 마찬가지입니다: 정보 (4 페이지), 작동 및 설치 지침 (32 페이지), 작동 및 설치 지침 (40 페이지)

페이지 인쇄

Cleaning and care

Changing a halogen lamp

^ Ensure the rangehood is

disconnected from the electricity

supply. To do this:

– switch off at the wall socket and

remove the plug, or

– remove the mains fuse, or

– remove the screw-out fuse (in

countries where this is applicable).

Exercise caution when changing

halogen lamps. They get very hot

during use and remain hot for some

time after being switched off.

Let them cool down before you

change them.

^ Remove the grease filters.

^ Slightly loosen the lamp's fastening

screw.

^ Slide the screw and the lamp down.

^ Tighten the screw again.

^ Turn the halogen lamp anti-clockwise

and pull it out.

Replace it with a lamp of the same

type: GU/GZ 10, 230 V, 50W.

^ Refit the lamp by reversing the steps

shown above. Please observe the

manufacturer's instructions.

^ Refit the grease filters.