Miele DA 219-2 Betriebs- und Installationsanleitung - Seite 34

Blättern Sie online oder laden Sie pdf Betriebs- und Installationsanleitung für Lüftungshaube Miele DA 219-2 herunter. Miele DA 219-2 44 Seiten. Ventilation system
Auch für Miele DA 219-2: Betriebs- und Installationsanleitung (40 seiten)

Seite drucken

Installation

^ Secure the canopy with 5 x 40 mm

screws into each drilled hole.

^ DA 217-2:

Secure the canopy with a 5 x 40 mm

screw.

^ DA 219-2:

Secure the canopy with two

5 x 40 mm screws.

^ Replace the glass light cover.

Inserting the non-return flap

^ Air extraction:

If a non-return flap is not present in

the venting system, the non-return

flap supplied must be fitted into the

exhaust connection on the motor. The

flaps must open upwards.

^ The hood is designed for 6" (150 mm)

exhaust ducting. If 5" (125 mm)

exhaust ducting is used the reducing

collar must be fitted into the exhaust

connection on the motor (see "Air

extraction").

^ Recirculation mode:

The non-return flap is not required.