- ページ 34

換気フード Miele DA 219-2のPDF 操作およびインストール手順をオンラインで閲覧またはダウンロードできます。Miele DA 219-2 44 ページ。 Ventilation system
Miele DA 219-2 にも：操作およびインストール手順 (40 ページ)

Installation

^ Secure the canopy with 5 x 40 mm

screws into each drilled hole.

^ DA 217-2:

Secure the canopy with a 5 x 40 mm

screw.

^ DA 219-2:

Secure the canopy with two

5 x 40 mm screws.

^ Replace the glass light cover.

Inserting the non-return flap

^ Air extraction:

If a non-return flap is not present in

the venting system, the non-return

flap supplied must be fitted into the

exhaust connection on the motor. The

flaps must open upwards.

^ The hood is designed for 6" (150 mm)

exhaust ducting. If 5" (125 mm)

exhaust ducting is used the reducing

collar must be fitted into the exhaust

connection on the motor (see "Air

extraction").

^ Recirculation mode:

The non-return flap is not required.