Miele DA 219-2 작동 및 설치 지침 - 페이지 34

{카테고리_이름} Miele DA 219-2에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele DA 219-2 44 페이지. Ventilation system
Miele DA 219-2에 대해서도 마찬가지입니다: 작동 및 설치 지침 (40 페이지)

페이지 인쇄

Installation

^ Secure the canopy with 5 x 40 mm

screws into each drilled hole.

^ DA 217-2:

Secure the canopy with a 5 x 40 mm

screw.

^ DA 219-2:

Secure the canopy with two

5 x 40 mm screws.

^ Replace the glass light cover.

Inserting the non-return flap

^ Air extraction:

If a non-return flap is not present in

the venting system, the non-return

flap supplied must be fitted into the

exhaust connection on the motor. The

flaps must open upwards.

^ The hood is designed for 6" (150 mm)

exhaust ducting. If 5" (125 mm)

exhaust ducting is used the reducing

collar must be fitted into the exhaust

connection on the motor (see "Air

extraction").

^ Recirculation mode:

The non-return flap is not required.