360 YIELD CENTER 360 BANDIT Einbauanleitung - Seite 4

Blättern Sie online oder laden Sie pdf Einbauanleitung für Landwirtschaftliche Geräte 360 YIELD CENTER 360 BANDIT herunter. 360 YIELD CENTER 360 BANDIT 4 Seiten.
Auch für 360 YIELD CENTER 360 BANDIT: Einbauanleitung (2 seiten)

Seite drucken
INSTALLATION INSTRUCTIONS
HARVEST INTERNATIONAL
STEP 6
REINSTALL CLOSING SYSTEM
18
Slide the closing system into place, ensuring the pin hole
lines up with the hole on the BANDIT unit.
Using the previously removed pin and hair clip
provided pair of 1/2" bolts and nuts, secure the closing
system to the BANDIT unit.
Reinstall insecticide attachment, if present.
STEP 7
ASSEMBLE PLUBING
21
Install orifice plates
19
Assemble pluming components in the arrangement shown
or the
18
above
21
.
Attach the plumbing assembly to each of the hoses coming
from the house guides
NOTE: If hoses are not fully seated in the push to connect,
they will leak. Hoses seat 7/8" of an inch deep or until you
hear a snap.
The supplied push to connect adapter in the 360 BANDIT kit
connects to 3/8" push to connect compatible hose.
Secure hoses to row unit with provided zip ties.
19
20
22
22
in the rubber grommets
.
20
.
22
PAGE 4
INSTALLATION COMPLETE
PLUMBING RECOMMENDATIONS:
To prevent excess fertilizer from dribbling out of the hoses
when product application is shut off, install one push to
connect polypropylene (Inlet x Outlet) 3/8" O.D. check valve
(not included) in the plumbing to each row prior to the 360
BANDIT orifices. Check valve is available at Dultmeier Sales
(Item #BUCV1103-P38).
A 50 mesh strainer (not included) can be used in the
complete plumbing system between tanks and 360
BANDIT to help prevent debris from blocking orifices.