- ページ 4

農機具 360 YIELD CENTER 360 BANDITのPDF インストレーション・インストラクションをオンラインで閲覧またはダウンロードできます。360 YIELD CENTER 360 BANDIT 4 ページ。
360 YIELD CENTER 360 BANDIT にも：インストレーション・インストラクション (2 ページ)

ページを印刷する

INSTALLATION INSTRUCTIONS

HARVEST INTERNATIONAL

STEP 6

REINSTALL CLOSING SYSTEM

Slide the closing system into place, ensuring the pin hole

lines up with the hole on the BANDIT unit.

Using the previously removed pin and hair clip

provided pair of 1/2" bolts and nuts, secure the closing

system to the BANDIT unit.

Reinstall insecticide attachment, if present.

STEP 7

ASSEMBLE PLUBING

Install orifice plates

Assemble pluming components in the arrangement shown

or the

above

Attach the plumbing assembly to each of the hoses coming

from the house guides

NOTE: If hoses are not fully seated in the push to connect,

they will leak. Hoses seat 7/8" of an inch deep or until you

hear a snap.

The supplied push to connect adapter in the 360 BANDIT kit

connects to 3/8" push to connect compatible hose.

Secure hoses to row unit with provided zip ties.

in the rubber grommets

PAGE 4

INSTALLATION COMPLETE

PLUMBING RECOMMENDATIONS:

To prevent excess fertilizer from dribbling out of the hoses

when product application is shut off, install one push to

connect polypropylene (Inlet x Outlet) 3/8" O.D. check valve

(not included) in the plumbing to each row prior to the 360

BANDIT orifices. Check valve is available at Dultmeier Sales

(Item #BUCV1103-P38).

A 50 mesh strainer (not included) can be used in the

complete plumbing system between tanks and 360

BANDIT to help prevent debris from blocking orifices.