Dialogic IMG 1010 Schnellstart-Handbuch - Seite 5

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Gateway Dialogic IMG 1010 herunter. Dialogic IMG 1010 11 Seiten. Connecting dc power
Auch für Dialogic IMG 1010: Installationsanleitung Handbuch (6 seiten), Schnellstart-Handbuch (18 seiten), Schnellstart-Handbuch (10 seiten), Schnellstart-Handbuch (10 seiten), Installationsanleitung Handbuch (9 seiten), Schnellstart-Handbuch (4 seiten)

Overview

This IMG 1010 Quick Start Guide is an abbreviated guide which explains how to connect

power and network cabling. For more information on installation and setup, please reference

the online documentation at http://www.dialogic.com/manuals.

Review the packing list to check that all the items listed on the packing list have been sent.

Should any discrepancies exist, contact your Dialogic Representative immediately.

If the IMG 1010 is powered by AC voltage then the AC input power must conform to the

specifications in the table below. Insert one end of AC cord into rear of IMG 1010 and the

other end into a grounded wall outlet, uninterruptible power supply (UPS), or surge

protector.

Power

120 – 240 VAC / 2 - 1.5 Amps

Frequency

50 or 60 Hz

The AC power docking station provides an AC input power module with an integrated fuse,

power switch, and standard three position female AC input connector. This connector allows

the docking station to interface with all variations of AC outlets by simply using a standard

power cable and compatible outlet plug. See IMG 1010-Installation and Setup Guide >

IMG 1010-Hardware Installation in online documentation for more information on

connecting AC power.

Operating Range

90 – 240 VAC

50-60 Hz