Dialogic IMG 1010 빠른 시작 매뉴얼 - 페이지 5

{카테고리_이름} Dialogic IMG 1010에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dialogic IMG 1010 11 페이지. Connecting dc power
Dialogic IMG 1010에 대해서도 마찬가지입니다: 설치 지침 설명서 (6 페이지), 빠른 시작 매뉴얼 (18 페이지), 빠른 시작 매뉴얼 (10 페이지), 빠른 시작 매뉴얼 (10 페이지), 설치 지침 매뉴얼 (9 페이지), 빠른 시작 매뉴얼 (4 페이지)

Overview

This IMG 1010 Quick Start Guide is an abbreviated guide which explains how to connect

power and network cabling. For more information on installation and setup, please reference

the online documentation at http://www.dialogic.com/manuals.

Review the packing list to check that all the items listed on the packing list have been sent.

Should any discrepancies exist, contact your Dialogic Representative immediately.

If the IMG 1010 is powered by AC voltage then the AC input power must conform to the

specifications in the table below. Insert one end of AC cord into rear of IMG 1010 and the

other end into a grounded wall outlet, uninterruptible power supply (UPS), or surge

protector.

Power

120 – 240 VAC / 2 - 1.5 Amps

Frequency

50 or 60 Hz

The AC power docking station provides an AC input power module with an integrated fuse,

power switch, and standard three position female AC input connector. This connector allows

the docking station to interface with all variations of AC outlets by simply using a standard

power cable and compatible outlet plug. See IMG 1010-Installation and Setup Guide >

IMG 1010-Hardware Installation in online documentation for more information on

connecting AC power.

Operating Range

90 – 240 VAC

50-60 Hz