- ページ 5
ゲートウェイ Dialogic IMG 1010のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Dialogic IMG 1010 11 ページ。 Connecting dc power
Dialogic IMG 1010 にも： 取付説明書 (6 ページ), クイック・スタート・マニュアル (18 ページ), クイック・スタート・マニュアル (10 ページ), クイック・スタート・マニュアル (10 ページ), 取付説明書 (9 ページ), クイック・スタート・マニュアル (4 ページ)
ページを印刷する
1.
Overview
This IMG 1010 Quick Start Guide is an abbreviated guide which explains how to connect
power and network cabling. For more information on installation and setup, please reference
the online documentation at http://www.dialogic.com/manuals.
Shipping Information
Review the packing list to check that all the items listed on the packing list have been sent.
Should any discrepancies exist, contact your Dialogic Representative immediately.
Connecting AC Power
Power Specifications
If the IMG 1010 is powered by AC voltage then the AC input power must conform to the
specifications in the table below. Insert one end of AC cord into rear of IMG 1010 and the
other end into a grounded wall outlet, uninterruptible power supply (UPS), or surge
protector.
AC
Power
120 – 240 VAC / 2 - 1.5 Amps
Frequency
50 or 60 Hz
AC Power Module
The AC power docking station provides an AC input power module with an integrated fuse,
power switch, and standard three position female AC input connector. This connector allows
the docking station to interface with all variations of AC outlets by simply using a standard
power cable and compatible outlet plug. See IMG 1010-Installation and Setup Guide >
IMG 1010-Hardware Installation in online documentation for more information on
connecting AC power.
Operating Range
90 – 240 VAC
50-60 Hz
1