Miller VL-M4 Benutzerhandbuch - Seite 20
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Zubehör für das Schweißen Miller VL-M4 herunter. Miller VL-M4 36 Seiten. Submerged arc controller for automatic welding
Seite drucken
4-7. Terminal Strip TE1 Connection Information
Terminal Number
21
40
41
42
43
7
B7
B6
B6A
B3
6
52
4-8. Remote 14 Receptacle RC2 Information
Contactor Control
Remote Output Control
Electrical Input Power
GND
OM-189 530 Page 16
Receptacle Location
M on 17-Pin
Voltage sense lead input.
L on 17-Pin
Normally open contacts with respect to pin T; closes when an arc is detected.
T on 17-PIn
Normally open contacts with respect to pin L; closes when an arc is detected.
P on 17-Pin
+ 24 volts dc for flux valve with respect to pin S when an arc is detected.
S on 17-PIn
Circuit common for flux valve.
Not Used
Not Used
Not Used
Not Used
Not Used
Not Used
–
115 VAC with respect to terminal 32 on terminal TE2; used to energize a flux
valve.
User Accessi-
Socket
ble Via TE2
Terminal #
A
2
B
4
C
77
D
75
E
76
G
32
I
31
K
33
Function Information
Socket Information
24 volts ac from welding power source (present whenever power
source is On).
Normally open set of relay contacts connect A to B when START is
pressed.
Remote command reference from welding power source.
Remote circuit common.
Output command signal to welding power source.
Circuit common for 24 and 115 volts ac circuits.
115 volts ac from welding power source (present whenever welding
power source is On).
Chassis common.