Diamond TQ-1800 Installations- und Betriebshandbuch - Seite 14
Blättern Sie online oder laden Sie pdf Installations- und Betriebshandbuch für Kommerzielle Lebensmittelausrüstung Diamond TQ-1800 herunter. Diamond TQ-1800 20 Seiten. Electric conveyor toasters
Seite druckenTQ-10 & TQ-15 MODELS
1. Plug toaster into a properly grounded electrical
outlet of the correct voltage, size and plug
configuration. See SPECIFICATIONS for details.
2. To toast the top and bottom sides of the bread,
place the TOP HEAT and BOTTOM HEAT
switches in the ON position.
To toast on the top side only, place the TOP
HEAT switch in the ON position and the
BOTTOM HEAT switch in the OFF position.
To toast on the bottom side only, place the
TOP HEAT switch in the OFF position and the
BOTTOM HEAT switch in the ON position.
See Figure 12.
3. Turn the COLOR CONTROL to the lightest
position while the unit heats up.
Color Control
Figure 12. Control Panel – TQ-10 & TQ-15 Models
11
NOTE: Allow approximately 15 to 20 minutes for a
warm-up period.
4. After
warm-up
period,
CONTROL to the medium position and toast two
slices of bread product then re-adjust the
COLOR CONTROL to the desired setting.
NOTE: To toast moist products such as English
Muffins, rye bread or whole wheat, slow the
conveyor by turning the Color Control knob to a
darker setting (clockwise).
Top Heat
On/Off Switch
OPERATION
set
the
COLOR
Bottom Heat
On/Off Switch
Form No. TQ2M-1005