Diamond TQ-1800 Installations- und Betriebshandbuch - Seite 15

Blättern Sie online oder laden Sie pdf Installations- und Betriebshandbuch für Kommerzielle Lebensmittelausrüstung Diamond TQ-1800 herunter. Diamond TQ-1800 20 Seiten. Electric conveyor toasters

Seite drucken
OPERATION
TQ-400, -405, -400H, -800, -805, -800H,
-1200 & -1800 MODELS
1. Plug toaster into a properly grounded electrical
outlet of the correct voltage, size and plug
configuration. See SPECIFICATIONS for details.
2. Place the On/Off switch in the ON position. See
Figure 13 for TQ-400, -800, and -1200 Series.
See Figure 14 for TQ-1800 Series.
3. Turn the TOP HEAT Control and BOTTOM HEAT
Control clockwise to the highest setting.
4. Turn the COLOR CONTROL to the lightest
position while the toaster heats up.
NOTE: Allow approximately 15 to 20 minutes for a
warm-up period.
5. After warm-up period, toast two slices of bread
product. Adjust the COLOR CONTROL if
needed.
NOTE: If toasted bread is too dark with the Color
Control set on the lightest setting, adjust the bottom
and top heat controls as needed. (Allow 15 to 20
minutes for toaster to re-adjust to new setting before
resuming operation.)
NOTE: To toast moist products such as English
Muffins, rye bread or whole wheat, slow the
conveyor by turning the Color Control knob to a
darker setting (clockwise).
NOTE: When toasting on a single-sided product
such as a bun or bagel place the product with the
cut side facing up. Adjust the bottom heat control to
a light setting, toast two slices of bread product and
adjust the Top and Bottom Heat Control as needed.
Bottom Heat
Control
Form No. TQ2M-1005
Top Heat Control
Figure 13. Control Panel – TQ-400, -800, and -1200 Series

TQ-400BA, -800BA, -800HBA, -1800BA

& -1800HBA MODELS
NOTE: TQ-400BA, -800BA, -800HBA, -1800BA
and -1800HBA toasters are designed specifically
for toasting one side of a bread product, such as
a bun or bagel. These models toast with the cut
side facing up.
1. Plug toaster into a properly grounded electrical
outlet of the correct voltage, size and plug
configuration. See SPECIFICATIONS for details.
2. Place the On/Off switch in the ON position. See
Figure 13 for TQ-400, -800, and -1200 Series.
See Figure 14 for TQ-1800 Series.
3. Turn the TOP HEAT Control clockwise to the
highest setting. Turn the BOTTOM HEAT Control
counter-clockwise to the lowest setting.
4. Turn the COLOR CONTROL to the lightest
position while the toaster heats up.
NOTE: Allow approximately 15 to 20 minutes for a
warm-up period.
5. After warm up period, toast two slices of bread
product. Adjust the COLOR CONTROL if
needed.
NOTE: If cut-side of bread product is too dark with
the Color Control set on the lightest setting, adjust
the Top Heat Control as needed. (Allow 15-20
minutes for toaster to re-adjust to new setting before
resuming operation.)
Color Control
Warning Light
Toaster is in Power Save
mode when flashing.
Push button and allow
toaster to heat up
before toasting.
Appliance is malfunctioning
when lit. Turn off power
and allow unit to cool.
See instruction manual
before operating.
Power Save Mode
12
On/Off Switch