HP 5120 SI Series Installationshandbuch - Seite 15

Blättern Sie online oder laden Sie pdf Installationshandbuch für Schalter HP 5120 SI Series herunter. HP 5120 SI Series 48 Seiten. 5120 si switch series
Auch für HP 5120 SI Series: Spezifikation (33 seiten)

Seite drucken

1. Setting up the Configuration Environment

(1) Front panel

Mounting the switch on a workbench

To mount the switch on a workbench:

Verify that the workbench is sturdy and reliably grounded.

Place the switch with bottom up, and clean the round holes in the chassis bottom with dry cloth.

Attach the rubber feet to the four round holes in the chassis bottom.

Place the switch with upside up on the workbench.

NOTE:

 Ensure good ventilation and 10 cm (3.9 in) of clearance around the chassis for heat dissipation.

 Avoid placing heavy objects on the switch.

Grounding the switch

Grounding the switch with a grounding strip

If a grounding strip is available at the installation site, connect the grounding cable to the grounding

strip.

(2) Rear panel