- ページ 15

スイッチ HP 5120 SI SeriesのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。HP 5120 SI Series 48 ページ。 5120 si switch series
HP 5120 SI Series にも：仕様 (33 ページ)

(1) Front panel

Mounting the switch on a workbench

To mount the switch on a workbench:

Verify that the workbench is sturdy and reliably grounded.

Place the switch with bottom up, and clean the round holes in the chassis bottom with dry cloth.

Attach the rubber feet to the four round holes in the chassis bottom.

Place the switch with upside up on the workbench.

NOTE:

 Ensure good ventilation and 10 cm (3.9 in) of clearance around the chassis for heat dissipation.

 Avoid placing heavy objects on the switch.

If a grounding strip is available at the installation site, connect the grounding cable to the grounding

strip.

(2) Rear panel