HP 5120 SI Series Installatiehandleiding - Pagina 15
Blader online of download pdf Installatiehandleiding voor {categorie_naam} HP 5120 SI Series. HP 5120 SI Series 48 pagina's. 5120 si switch series
Ook voor HP 5120 SI Series: Specificatie (33 pagina's)
Pagina afdrukken
(1) Front panel
Mounting the switch on a workbench
To mount the switch on a workbench:
1.
Verify that the workbench is sturdy and reliably grounded.
2.
Place the switch with bottom up, and clean the round holes in the chassis bottom with dry cloth.
3.
Attach the rubber feet to the four round holes in the chassis bottom.
4.
Place the switch with upside up on the workbench.
NOTE:
Ensure good ventilation and 10 cm (3.9 in) of clearance around the chassis for heat dissipation.
Avoid placing heavy objects on the switch.
Grounding the switch
Grounding the switch with a grounding strip
If a grounding strip is available at the installation site, connect the grounding cable to the grounding
strip.
1
2
(2) Rear panel
11