Olympus BX60 Anleitung Handbuch - Seite 35

Blättern Sie online oder laden Sie pdf Anleitung Handbuch für Mikroskop Olympus BX60 herunter. Olympus BX60 48 Seiten. System microscope
Auch für Olympus BX60: Schnellstart-Handbuch (4 seiten)

Seite drucken

•■si

fig. 60

fig. 61

fig. 62

Photo Eyepiece

(Fig. 60)

Use onfy the PE photo eyepiece for photomicrogfspny. Insert the photo

eyepiece © of your choice into the straight photo tube mounted on

the trinocular observation tube.

Mounting the Camera Unit

(Fig. 61)

Place the camera unit directly over the circular dovetail of the straight

photo tube. Make sure the index dots 0 on the straight photo tube

and the camera unit are aligned, then damp the unit.

Selecting the Observation Tube Light Path

See page 26 of the 'Observation Tube" section.

Focus Adjustment

(Ffg. 82)

1. Camera focusing is done using the binocular section of the trinocular

observation tuba.

* Whenever you remove the focusing telescope from the camera

unit be sure to install the dust cap.

2. Insert a finder eyepiece into the right eyepiece sleeve.

3. The finder eyepiece has a built-in focusing tens with four masks and

a double crosjline. and the focus is practically the same for the focusing

lens and the camera film plane. The masks indicate the areas covered,

and the numerals next to the masks correspond to the magnification

of the photo eyepiece. Different finder eyepieces are available for afferent

cameras. Select the type that is appropriate for the camera being used.

4. Because of the great depth of focus of 1.25X to 4X objectives, use

of the focusing magnifier (OFT) is recommended for accurate focusing.

O When using low power objectives, focusing may be accomplished

easier usmg the focusing telescope on the camera unit rather than the

finder eyepiece.