Axminster Engineer Series Original-Bedienungsanleitung - Seite 8
Blättern Sie online oder laden Sie pdf Original-Bedienungsanleitung für Drehmaschine Axminster Engineer Series herunter. Axminster Engineer Series 16 Seiten. Pillar drill
Auch für Axminster Engineer Series: Betriebshandbuch (20 seiten), Original-Bedienungsanleitung (16 seiten), Original-Bedienungsanleitung (19 seiten), Original-Bedienungsanleitung (18 seiten)
Seite drucken
ASSEMBLY
To assemble your CT-502H, follow the instructions given below:
The CT-502H comes with two swivel casters and two
lock swivel casters or portability. To install the casters:
1. Put a piece cardboard on the floor to prevent the dust
collector body from being scratched. Get the help of a
friend or assistant and position the dust collector on
the cardboard on its side.
2. Attach the swivel caster to the dust collector base by
aligning the four holes on the base with the four holes
on the swivel caster bracket and securing it using screws provided.
To install the inlet:
Align the holes on the inlet with the holes on the dust
collector and secure it using screws provided.
To install the Y-inlet:
Align the holes on the Y-inlet with the holes on the dust
collector and secure it using screws provided.