Axminster Engineer Series Orijinal Talimat Kılavuzu - Sayfa 8

Torna Tezgahı Axminster Engineer Series için çevrimiçi göz atın veya pdf Orijinal Talimat Kılavuzu indirin. Axminster Engineer Series 16 sayfaları. Pillar drill
Ayrıca Axminster Engineer Series için: Kullanım Kılavuzu (20 sayfalar), Orijinal Talimat Kılavuzu (16 sayfalar), Orijinal Talimat Kılavuzu (19 sayfalar), Orijinal Talimat Kılavuzu (18 sayfalar)

ASSEMBLY

To assemble your CT-502H, follow the instructions given below:

The CT-502H comes with two swivel casters and two

lock swivel casters or portability. To install the casters:

1. Put a piece cardboard on the floor to prevent the dust

collector body from being scratched. Get the help of a

friend or assistant and position the dust collector on

the cardboard on its side.

2. Attach the swivel caster to the dust collector base by

aligning the four holes on the base with the four holes

on the swivel caster bracket and securing it using screws provided.

To install the inlet:

Align the holes on the inlet with the holes on the dust

collector and secure it using screws provided.

To install the Y-inlet:

Align the holes on the Y-inlet with the holes on the dust

collector and secure it using screws provided.