ARC Audio KS125.2 MINI Installationsanleitung Handbuch - Seite 8

Blättern Sie online oder laden Sie pdf Installationsanleitung Handbuch für Verstärken ARC Audio KS125.2 MINI herunter. ARC Audio KS125.2 MINI 17 Seiten. Moto series

ARC Audio KS125.2 MINI Installationsanleitung Handbuch
Tools Needed-
#2 Phillips Screwdriver
T40 Torx Bit w/handle
T25 Torx Bit w/handle
Fender Cover (Recommended)
Drill (Recommended)
Hot Glue Gun (Recommended for seperate tweeter installation)
Included in this kit-
Velcro (adhesive backed)
(10) Zip Tie Wire harness straps
(10) BLue insulated wire butt connectors
(3) 10/32 dia 1/2 Black allan head bolts
Installation Instructions
Step 1 -
Protect your investement
It is always recommended that when you are installing your
Arc Audio MPAK Series audio components to protect your motorcycle
from potential damage and use a protective fender cover. This will
reduce the risk of damage from falling tools or debris.
Step 2 -
Remove the Seat
Remove the single #2 Phillips
screw located at the rear of the
seat. Next lift up on the rear of
the seat and carefully slide the
seat backwards and set aside in a
safe place.
---If you are working on an Elec-
tra Glide please skip to section
7A for additional notes on seat
removal and rear speaker installa-
tion.
Installation Instructions

Harley Davidson

Ultra Classic + Electra Glide
(Amplifier Installation)
10mm Open End Wrench
1/2" Socket w/ratchet
Wire Cutters
Crimpers
7/32 Drill Bit
Wire Harness w/terminations
Turn on lead w/terminations
(3) 10/32 nuts
(3) 10/32 lock washers