ARC Audio KS125.2 MINI Instrukcja instalacji - Strona 8
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Wzmacniacz ARC Audio KS125.2 MINI. ARC Audio KS125.2 MINI 17 stron. Moto series
Drukuj stronę
Tools Needed-
#2 Phillips Screwdriver
T40 Torx Bit w/handle
T25 Torx Bit w/handle
Fender Cover (Recommended)
Drill (Recommended)
Hot Glue Gun (Recommended for seperate tweeter installation)
Included in this kit-
Velcro (adhesive backed)
(10) Zip Tie Wire harness straps
(10) BLue insulated wire butt connectors
(3) 10/32 dia 1/2 Black allan head bolts
Installation Instructions
Step 1 -
Protect your investement
It is always recommended that when you are installing your
Arc Audio MPAK Series audio components to protect your motorcycle
from potential damage and use a protective fender cover. This will
reduce the risk of damage from falling tools or debris.
Step 2 -
Remove the Seat
Remove the single #2 Phillips
screw located at the rear of the
seat. Next lift up on the rear of
the seat and carefully slide the
seat backwards and set aside in a
safe place.
---If you are working on an Elec-
tra Glide please skip to section
7A for additional notes on seat
removal and rear speaker installa-
tion.
Installation Instructions
Harley Davidson
Ultra Classic + Electra Glide
(Amplifier Installation)
10mm Open End Wrench
1/2" Socket w/ratchet
Wire Cutters
Crimpers
7/32 Drill Bit
Wire Harness w/terminations
Turn on lead w/terminations
(3) 10/32 nuts
(3) 10/32 lock washers