CREE LIGHTING IG Series Einbauanleitung - Seite 4

Blättern Sie online oder laden Sie pdf Einbauanleitung für Lantern CREE LIGHTING IG Series herunter. CREE LIGHTING IG Series 4 Seiten. Wireless led parking luminaire

Seite drucken

ELECTRICAL CONNECTIONS

STEP 1:

NOTE: USE MIN. 90°C SUPPLY CONDUCTORS for 120-277V

luminaires and USE MIN 75°C SUPPLY CONDUCTORS for the

347V luminaires.

Make the following Electrical Connections for products rated

120V, 277V, or 347V (Line-Neutral), or rated 208V, or 240V

(Line-Line):

a. For products rated 120V, 277V or 347V, connect the Black

lead from the luminaire to the LINE supply wiring inside

the junction box or for products rated 208V, or 240V,

connect to the HOT 1 supply wiring.

b. For products rated 120V, 277V or 347V, connect the White

lead from the luminaire to the NEUTRAL supply wiring

inside the junction box or for products rated 208V, or

240V, connect to the HOT 2 supply wiring.

c. Connect the Green or Green/Yellow lead from the

luminaire to the GROUND supply wiring inside the

junction box.

STEP 2:

The Blue/White low-voltage wires are used to override the

luminaire to full output. They may be connected to third-party

equipment to provide an override signal to the luminaire. Do not

wire the Blue/White wires to high-voltage. The wires should be

capped if not being used.

• SHORT: Luminaire overrides to full output

• OPEN: Luminaire operates normally

is subject to change. See www.creelighting.com/warranty for warranty and specifications. Cree

registered trademarks of Cree, Inc.

4 of 4

LINE

OR HOT 1

GREEN

NEUTRAL

OR HOT 2

and the Cree logo are

LUMINAIRE

LINE-BLACK

GROUND-GREEN

NEUTRAL-WHITE

BLUE W/WHITE

www.creelighting.com

LPN00305X0012A0_A