FIAMA F1X502SSI Handbuch für Gebrauch und Wartung - Seite 2
Blättern Sie online oder laden Sie pdf Handbuch für Gebrauch und Wartung für Monitor FIAMA F1X502SSI herunter. FIAMA F1X502SSI 8 Seiten. Display unit with microprocessor
Seite drucken
F1X5_SSI
Display unit with microprocessor
Purpose of the manual
This manual has been created by the manufacturer to provide all the necessary information to those who,
relative to the instrument, are authorised to carry out safely installation , maintenance, dismantling and
disposal tasks. All necessary information for buyers and designers is reported in the "sales catalogue". In
addition to complying with the correct technical construction rules, the information must be read attentively
and rigorously applied.
Non compliance with the stated rules can cause health risks, risks to personal safety and cause economic
damage. This information manual, originally created by the manufacturer in the Italian language, is also
available in other languages to satisfy legislative and/or commercial requirements. The documentation must
remain in the possession of the person responsible for the proposed task, in a suitable place to conserve it in
the best condition, where it is easily accessible for consultation. In the case that it is lost or deteriorates,
request a substitute directly to the manufacturer, quoting the code of the present manual. The manual reflects
the technological status at the time the product is introduced on the market. The manufacturer however,
reserves the right to make modifications, additions or improvements to the same manual without the need to
consider the current version as unsuitable.
Identification of equipment
The identification plate is applied to the instrument. To determine the meaning of the instrument identification
code, refer to the sales catalogue.
Environmental Conditions
Ambient temperature range: min. 0°C, max.+ 50°C. It is forbidden to use the instrument, if not explicitly
permitted for the purpose, in potentially explosive atmospheres or where the use of anti-explosive
components is required.
Storage
Below are some recommendations to which attention should be paid in the storage of the instrument. Avoid
excessively humid environments and exposure to the elements (do not store outside). Avoid the instrument
direct contact with the floor. Place the instrument in its original packaging.
Declaration of conformity and CE marking
The instrument complies with the following Community Directives:
2014/30/EU Electromagnetic compatibility, 2014/35/EU Low voltage, 2011/65/EU RoHS.
Maintenance
The equipment does not require particular maintenance interventions except cleaning, which must only be
carried out exclusively with a soft, damp cloth with ethylic alcohol or water. Do not use solvents derived from
hydrocarbons (trichloroethylene, gasoline, diluents etc.). The use of these products will irreversibly
compromise the functioning of the instrument. Repairs must be carried out exclusively at a FIAMA technical
assistance centre.
Calibrations and checks
It is advisable to check calibration of the instrument periodically, about every working year. To carry out
calibrations, refer to the calibration procedure described in this manual.
When assistance is required
For any technical assistance required, refer directly to the sales network of the manufacturer, stating the
figures indicated on the identification plate, the approximate number of hours of use and the type of fault
detected.
Responsibilities of the manufacturer
The manufacturer is not responsible in case of:
• use of the instrument which does not comply with national safety and accident-prevention laws;
• incorrect installation, lack or incorrect observation of the instructions stated in this manual;
• Electricity supply faults;
• Modifications or tampering;
• Operations being conducted by unauthorised or unqualified personnel.
The safety of the instrument also depends on the scrupulous compliance to the regulations stated in this
manual, and in particular it is necessary: always operate within the operating limits of the instrument and
always carry out a careful ordinary maintenance.
• Assign to the inspection and maintenance phases operators trained to carry out this task.
• The preset configurations in this manual are the only ones permitted.
• Do not try to use the instrument in any way other than that stated in the instructions provided.
Pag. 2/2
Date:13/01/16
F1X_SSI_ing.doc