Cisco Catalyst 3110G Handbuch "Erste Schritte - Seite 16

Blättern Sie online oder laden Sie pdf Handbuch "Erste Schritte für Schalter Cisco Catalyst 3110G herunter. Cisco Catalyst 3110G 31 Seiten. Catalyst switch module for ibm bladecenter
Auch für Cisco Catalyst 3110G: Ergänzendes Handbuch (20 seiten), Hardware-Installationshandbuch (48 seiten)

Seite drucken

Select Configure > Express Setup from the menu. The Express Setup Basic Settings screen

Step 3

appears (Figure 9).

Figure 9

Express Setup Basic Settings Screen

Enter this information in the Network Settings fields.

Step 4

In the Switch Password field, enter your password. The password can be from 1 to 25

–

alphanumeric characters, can start with a number, is case sensitive, allows embedded spaces,

but does not allow spaces at the beginning or end.

In the Confirm Switch Password field, enter your password again.

–

You can enter the Optional Settings information now or enter it later by using the switch module

device manager interface.

In the Host Name field, enter a name for the switch module. The host name is limited to

Step 5

31 characters; embedded spaces are not allowed.

Step 6

In the System Date and System Time fields, enter the current date and time, or use the down

arrows to select them.

In the Time Zone field, use the down arrow to choose your time zone.

Step 7

Step 8

Click Enable in the Daylight Savings Time field to enable this feature.