Cisco Catalyst 3110G Getting Started Manual - Page 16
Browse online or download pdf Getting Started Manual for Switch Cisco Catalyst 3110G. Cisco Catalyst 3110G 31 pages. Catalyst switch module for ibm bladecenter
Also for Cisco Catalyst 3110G: Supplementary Manual (20 pages), Hardware Installation Manual (48 pages)
Print Page
Select Configure > Express Setup from the menu. The Express Setup Basic Settings screen
Step 3
appears (Figure 9).
Figure 9
Express Setup Basic Settings Screen
Enter this information in the Network Settings fields.
Step 4
In the Switch Password field, enter your password. The password can be from 1 to 25
–
alphanumeric characters, can start with a number, is case sensitive, allows embedded spaces,
but does not allow spaces at the beginning or end.
In the Confirm Switch Password field, enter your password again.
–
You can enter the Optional Settings information now or enter it later by using the switch module
device manager interface.
In the Host Name field, enter a name for the switch module. The host name is limited to
Step 5
31 characters; embedded spaces are not allowed.
Step 6
In the System Date and System Time fields, enter the current date and time, or use the down
arrows to select them.
In the Time Zone field, use the down arrow to choose your time zone.
Step 7
Step 8
Click Enable in the Daylight Savings Time field to enable this feature.
16