Cisco Catalyst 3110G 시작하기 매뉴얼 - 페이지 16

{카테고리_이름} Cisco Catalyst 3110G에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Catalyst 3110G 31 페이지. Catalyst switch module for ibm bladecenter
Cisco Catalyst 3110G에 대해서도 마찬가지입니다: 보충 설명서 (20 페이지), 하드웨어 설치 매뉴얼 (48 페이지)

페이지 인쇄

Select Configure > Express Setup from the menu. The Express Setup Basic Settings screen

Step 3

appears (Figure 9).

Figure 9

Express Setup Basic Settings Screen

Enter this information in the Network Settings fields.

Step 4

In the Switch Password field, enter your password. The password can be from 1 to 25

–

alphanumeric characters, can start with a number, is case sensitive, allows embedded spaces,

but does not allow spaces at the beginning or end.

In the Confirm Switch Password field, enter your password again.

–

You can enter the Optional Settings information now or enter it later by using the switch module

device manager interface.

In the Host Name field, enter a name for the switch module. The host name is limited to

Step 5

31 characters; embedded spaces are not allowed.

Step 6

In the System Date and System Time fields, enter the current date and time, or use the down

arrows to select them.

In the Time Zone field, use the down arrow to choose your time zone.

Step 7

Step 8

Click Enable in the Daylight Savings Time field to enable this feature.