Shimano DENDOUMARU 4000HP Gebrauchsanweisung - Seite 8
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Fischerei-Ausrüstung Shimano DENDOUMARU 4000HP herunter. Shimano DENDOUMARU 4000HP 32 Seiten.
Seite drucken
Learning Method
Things you should do before starting to wind is explained in the flow diagram below.
"As shown here, there are 2 methods available (
S L S
It can be operated only if 12V power source is connected.
When winding line other than Shimano Antares 50lbs.-600m (See P.9-10)
Press mode-
switch once
Learning mode
When Shimano ANTARES 50lbs.-600M can be wound (See P. 11)
Press mode-
switch twice
Specify mode
8
Line winding
Wind all line being
starts ~ finish
used and press
MEMO/0 SET button
Winding-up with
for 3 sec. or more.
Main Switch
Connect the
supplied 10m line,
and wind manually
Line winding
starts ~ finish
It will stop automatically
10M before the end of 600M.
Winding-up with Main Switch
1
2
~
). For detail explanation of each method, refer to respective pages."
Press MEMO/0 SET
button for 3 sec.
or more.
Wind the remaining
line and press
MEMO/0 SET button
for 3 sec. or more.
Pull out and
remove the
connected line.
Finish
Finish