- ページ 8
釣具 Shimano DENDOUMARU 4000HPのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Shimano DENDOUMARU 4000HP 32 ページ。
Learning Method
Things you should do before starting to wind is explained in the flow diagram below.
"As shown here, there are 2 methods available (
S L S
It can be operated only if 12V power source is connected.
When winding line other than Shimano Antares 50lbs.-600m (See P.9-10)
Press mode-
switch once
Learning mode
When Shimano ANTARES 50lbs.-600M can be wound (See P. 11)
Press mode-
switch twice
Specify mode
8
Line winding
Wind all line being
starts ~ finish
used and press
MEMO/0 SET button
Winding-up with
for 3 sec. or more.
Main Switch
Connect the
supplied 10m line,
and wind manually
Line winding
starts ~ finish
It will stop automatically
10M before the end of 600M.
Winding-up with Main Switch
1
2
~
). For detail explanation of each method, refer to respective pages."
Press MEMO/0 SET
button for 3 sec.
or more.
Wind the remaining
line and press
MEMO/0 SET button
for 3 sec. or more.
Pull out and
remove the
connected line.
Finish
Finish