Shimano DENDOUMARU 4000HP Buku Petunjuk - Halaman 8

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Peralatan Memancing Shimano DENDOUMARU 4000HP. Shimano DENDOUMARU 4000HP 32 halaman.

Learning Method

Things you should do before starting to wind is explained in the flow diagram below.

"As shown here, there are 2 methods available (

S L S

It can be operated only if 12V power source is connected.

When winding line other than Shimano Antares 50lbs.-600m (See P.9-10)

Press mode-

switch once

Learning mode

When Shimano ANTARES 50lbs.-600M can be wound (See P. 11)

Press mode-

switch twice

Specify mode

Line winding

Wind all line being

starts ~ finish

used and press

MEMO/0 SET button

Winding-up with

for 3 sec. or more.

Main Switch

Connect the

supplied 10m line,

and wind manually

Line winding

starts ~ finish

It will stop automatically

10M before the end of 600M.

Winding-up with Main Switch

). For detail explanation of each method, refer to respective pages."

Press MEMO/0 SET

button for 3 sec.

or more.

Wind the remaining

line and press

MEMO/0 SET button

for 3 sec. or more.

Pull out and

remove the

connected line.

Finish