Shimano SG-8C20 Service-Handbuch - Seite 21

Blättern Sie online oder laden Sie pdf Service-Handbuch für Industrielle Ausrüstung Shimano SG-8C20 herunter. Shimano SG-8C20 36 Seiten. Inter-8 coaster hub
Auch für Shimano SG-8C20: Anleitung für den technischen Service (4 seiten)

Seite drucken

Assembly of the INTER-8 coaster hub

With the hub axle unit mount-

ed in a vice, align the two

teeth on the clutch unit with

the two notches in the hub

axle unit. Turn the clutch unit

clockwise until it is in its final

position as shown.

(Y-35P 98060)

Install the return spring with

the largest coil downward.

The spring should sit in the

groove on the clutch unit,

shown as a blue line in the

picture. Be careful not to

install the return spring A

upside down.

Assemble the driver unit by

aligning the more shallow

notch on the driver unit

with the wider tooth on the

clutch unit. Rotate the driver

counterclockwise to hold the

compressed spring in position.

(Y-34R 98050)

Clutch unit

NOTE:

During the assembly procedures

coat all seals, gears and pawl

assemblies with a thin coat of

Nexus specific grease. Where

indicated by blue grease icon,

apply grease liberally.

(Y-041020800)

Return spring A

(Y-34R 21000)

NOTE:

Assemble the driver

unit while pushing

pawls B as shown in

the picture.

Set drive unit

while turn it

counterclock-

wise.