Epson 1815p - PowerLite XGA LCD Projector Benutzerhandbuch - Seite 12

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Projektor Epson 1815p - PowerLite XGA LCD Projector herunter. Epson 1815p - PowerLite XGA LCD Projector 27 Seiten. Release of check tool for network projectors v1.00 for windows
Auch für Epson 1815p - PowerLite XGA LCD Projector: Benutzerhandbuch (42 seiten), Betriebshandbuch (36 seiten), Betriebshandbuch (47 seiten), Schnelles Einrichten (2 seiten), Benutzerhandbuch (1 seiten), Funktion Handbuch (5 seiten), Software-Handbuch (2 seiten), Konformitätserklärung (4 seiten), Teileliste (1 seiten), Produkt-Support-Bulletin (45 seiten), Produkt-Support-Bulletin (25 seiten), Produkt-Support-Bulletin (22 seiten), Produkt-Support-Bulletin (28 seiten), Produkt-Support-Bulletin (41 seiten), Produkt-Support-Bulletin (34 seiten), Produkt-Support-Bulletin (28 seiten), Produkt-Support-Bulletin (15 seiten), Produkt-Support-Bulletin (22 seiten)

Seite drucken

Epson 1815p - PowerLite XGA LCD Projector Benutzerhandbuch

PowerLite 1810p/1815p

Configuring the Network Settings for Windows

Before connecting to the projector, you need to make sure the

settings for your notebook's or PC's network card match the

settings you entered for the projector.

1. Access your wireless network Properties window. For

example, in Windows XP you would click

Panel > Network and Internet Connections

the

Network Connections

this:

Right-click and select Properties

2. Right-click the

Wireless Network Connection

select

. You see a screen similar to this:

Properties

3. Click the

button.

Configure

PowerLite 1810p/1815p

Start > Control

. Then click

icon. You see a screen similar to

icon and

Click here

4. Click the

Advanced

5. Check your wireless card or adapter device settings.

(Depending on the type of card or adapter you're using,

some of the settings may be different from those listed here.)

❏ Set the Network Type to

❏ Set the SSID to match the name you assigned to the

projector's ESSID.

❏ Make sure Encryption is

6. Click the

General

or adapter is enabled.

7. When you're done, click

box.

Now you're ready to connect to the projector. See "Projecting

Over a Network" on page 17.

Note: When you connect in Ad Hoc mode, your connection to other

wireless networks or devices is broken. If you need to remain

connected to your wireless network, use Access Point mode. Also,

make sure you reconnect to your original wireless network when you

are done using the projector.

Configuring the Network Settings for Macintosh

Your AirPort software is automatically configured to allow your

Mac to detect both computer-to-computer (Ad Hoc) and

Access Point networks. Typically, you only need to select your

projector's ESSID from the AirPort status menu on the Mac

menu bar. If you're having problems detecting the projector,

follow these steps:

1. From the Apple pull-down menu, select

Preferences

2. Double-click the

Network

settings window.

3/08

tab. You see a screen similar to this:

802.11 Ad Hoc

Disabled

tab and make sure that your wireless card

to close the Properties dialog

System

icon. You see the Network