Cisco 6800 Series Hardware-Installation - Seite 7

Blättern Sie online oder laden Sie pdf Hardware-Installation für IP-Telefon Cisco 6800 Series herunter. Cisco 6800 Series 20 Seiten. Ip phone, multiplatform phones
Auch für Cisco 6800 Series: Schnellstart-Handbuch (3 seiten), Benutzerhandbuch (8 seiten), Wartungshandbuch (8 seiten), Benutzerhandbuch (14 seiten), Handbuch zur Fehlersuche (12 seiten), Schnellstart-Handbuch (4 seiten), Benutzerhandbuch (22 seiten), Schnellstart-Handbuch (4 seiten), Installationshandbuch (39 seiten), Schnellstart-Handbuch (2 seiten), Schnellstart-Handbuch (2 seiten), Schnellstart-Handbuch (2 seiten)

Hardware Installation

• Red, solid—Network connection resetting.

Use this procedure to check that the base station and the network can communicate with each other, before

you mount the base station in the chosen location.

Before you begin

The base station requires:

• Power over Ethernet (PoE) or a power adapter

• LAN connection

• An IP address assigned by DHCP in the network

Procedure

Step 1

Plug one end of the Ethernet cable into the base station.

Step 2

Plug the other end of the Ethernet cable into the LAN port.

Step 3

If you don't use PoE, plug the power adapter into the base station and then into the electrical outlet.

Step 4

If the LED flashes red after a few minutes, do these steps:

a) Locate the Reset button on the bottom edge of the base station.

b) Press and hold Reset until the LED is a solid red.

c) Release Reset.

The LED should flash amber and then try to connect. If the LED doesn't light green, then the base station

can't get an IP address. See

What to do next

Mount the base station with one of these procedures:

•

Mount the Base Station or Repeater on the Ceiling

You can mount the base station or repeater on a ceiling. They use a custom ceiling mount bracket that you

can install on the ceiling. You need to order the ceiling mount bracket.

Base Station LED is Solid Red

Mount the Base Station or Repeater on the Ceiling, on page 7

Mount the Base Station or Repeater on a Desk, on page 11

Mount the Base Station or Repeater on the Wall, on page 12

Mount the Base Station or Repeater on the Ceiling

for further help.

Hardware Installation