Cisco 7931G - Unified IP Phone VoIP Handbuch für die Verwaltung - Seite 12

Blättern Sie online oder laden Sie pdf Handbuch für die Verwaltung für IP-Telefon Cisco 7931G - Unified IP Phone VoIP herunter. Cisco 7931G - Unified IP Phone VoIP 17 Seiten. For cisco unified callmanager express 4.0
Auch für Cisco 7931G - Unified IP Phone VoIP: Benutzerhandbuch (20 seiten), Handbuch für die Verwaltung (10 seiten), Handbuch für die Verwaltung (20 seiten), Einbauanleitung (4 seiten), Handbuch (30 seiten), Handbuch für die Verwaltung (12 seiten), Kurzreferenz (2 seiten), Schnellreferenzkarte (2 seiten), Benutzerhandbuch (15 seiten)

Adding Phones to the Cisco Unified Communications Manager Database

Adding Phones with Auto-Registration

Note

Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 6.1

2-12

Chapter 2

By enabling auto-registration before you begin installing phones, you can:

Add phones without first gathering MAC addresses from the phones.

•

Automatically add a Cisco Unified IP Phone to the Cisco Unified

•

Communications Manager database when you physically connect the phone

to your IP telephony network. During auto-registration, Cisco Unified

Communications Manager assigns the next available sequential directory

number to the phone.

•

Quickly enter phones into the Cisco Unified Communications Manager

database and modify any settings, such as the directory numbers, from

Cisco Unified Communications Manager.

Move auto-registered phones to new locations and assign them to different

•

device pools without affecting their directory numbers.

Cisco recommends that you use auto-registration to add fewer than 100 phones to

your network. To add more than 100 phones to your network, use the Bulk

Administration Tool (BAT). See the

page

2-14.

Auto-registration is disabled by default. In some cases, you might not want to use

auto-registration: for example, if you want to assign a specific directory number

to the phone, or if you plan to implement authentication or encryption, as

described in Cisco Unified Communications Manager Security Guide. For

information about enabling auto-registration, refer to "Enabling

Auto-Registration" in Cisco Unified Communications Manager Administration

Guide.

When you configure the cluster for mixed mode through the Cisco CTL client,

auto-registration is automatically disabled. When you configure the cluster for

non-secure mode through the Cisco CTL client, auto-registration is automatically

enabled.