Cisco 7940G Referenzhandbuch - Seite 17

Blättern Sie online oder laden Sie pdf Referenzhandbuch für IP-Telefon Cisco 7940G herunter. Cisco 7940G 24 Seiten. Ios telephony services ip phone
Auch für Cisco 7940G: Benutzerhandbuch (21 seiten), Benutzerhandbuch (25 seiten), Datenblatt (7 seiten), Handbuch (35 seiten), Kurzreferenz (2 seiten), Benutzerhandbuch (15 seiten), Kurzreferenz-Handbuch (2 seiten), Benutzerhandbuch (20 seiten), Telefon-Handbuch (17 seiten), Handbuch für Administratoren (15 seiten), Benutzerhandbuch (16 seiten), Handbuch für die Verwaltung (29 seiten), Handbuch (21 seiten), Installationshandbuch (12 seiten), Benutzerhandbuch (10 seiten)

Cisco 7940G Referenzhandbuch
when you try to Intercom .
receiving an intercom Call
When someone initiates an Intercom call to your
phone and your phone is idle, your phone will
beep and your speakerphone will be enabled

MUTe

Mute disables the microphone of the handset,
speakerphone or headset so you can have a private
conversation .
To enable Mute
Press the Mute button . The Mute button will glow
red and the display will briefly note "Microphone
Mute On" to show that Mute is active .
To disable Mute
Press the Mute button again . The Mute button
will go dark and the display will briefly indicate
"Microphone Mute Off" to indicate that Mute is
cancelled .

niGHT

Companies often have different call treatments
for daytime versus after-hours callers . The Night
capability can be assigned to a user's phone to
override the standard day-of-week/time-of-day logic .
The night feature has three modes:
Normal – Calls will be handled using the standard
day-of-week/time-of-day logic . No action is
required by the user when operating in Normal
mode .
Temporary Night Mode temporarily overrides
the normal day-of-week/time-of-day logic . It
toggles between day-mode and night-mode .
At the change in the day-of-week/time-of-
day schedule, the system will revert back to
Normal operation .
To enable Temporary Mode, press the Night
softkey once
Permanent Night Mode overrides the normal day-
of-week/time-of-day logic until the user manually
changes the state back to Normal
13