Cisco 7940G Manuale di riferimento - Pagina 17

Sfoglia online o scarica il pdf Manuale di riferimento per Telefono IP Cisco 7940G. Cisco 7940G 24. Ios telephony services ip phone
Anche per Cisco 7940G: Manuale d'uso (21 pagine), Manuale d'uso (25 pagine), Scheda tecnica (7 pagine), Manuale (35 pagine), Riferimento rapido (2 pagine), Manuale d'uso (15 pagine), Manuale di riferimento rapido (2 pagine), Manuale d'uso (20 pagine), Manuale del telefono (17 pagine), Manuale dell'amministratore (15 pagine), Manuale d'uso (16 pagine), Manuale di amministrazione (29 pagine), Manuale (21 pagine), Manuale di installazione (12 pagine), Manuale d'uso (10 pagine)

Cisco 7940G Manuale di riferimento
when you try to Intercom .
receiving an intercom Call
When someone initiates an Intercom call to your
phone and your phone is idle, your phone will
beep and your speakerphone will be enabled

MUTe

Mute disables the microphone of the handset,
speakerphone or headset so you can have a private
conversation .
To enable Mute
Press the Mute button . The Mute button will glow
red and the display will briefly note "Microphone
Mute On" to show that Mute is active .
To disable Mute
Press the Mute button again . The Mute button
will go dark and the display will briefly indicate
"Microphone Mute Off" to indicate that Mute is
cancelled .

niGHT

Companies often have different call treatments
for daytime versus after-hours callers . The Night
capability can be assigned to a user's phone to
override the standard day-of-week/time-of-day logic .
The night feature has three modes:
Normal – Calls will be handled using the standard
day-of-week/time-of-day logic . No action is
required by the user when operating in Normal
mode .
Temporary Night Mode temporarily overrides
the normal day-of-week/time-of-day logic . It
toggles between day-mode and night-mode .
At the change in the day-of-week/time-of-
day schedule, the system will revert back to
Normal operation .
To enable Temporary Mode, press the Night
softkey once
Permanent Night Mode overrides the normal day-
of-week/time-of-day logic until the user manually
changes the state back to Normal
13