Cisco NCS 4000 Series Handbuch zur Fehlersuche - Seite 20

Blättern Sie online oder laden Sie pdf Handbuch zur Fehlersuche für Netzwerk-Router Cisco NCS 4000 Series herunter. Cisco NCS 4000 Series 44 Seiten. Network convergence system
Auch für Cisco NCS 4000 Series: Handbuch Auspacken, Umziehen und Sichern (40 seiten)

Cisco NCS 4000 Series Handbuch zur Fehlersuche

Clear the EJECTOR-FLAPS-OPEN Alarm

Clear the EJECTOR-FLAPS-OPEN Alarm
Procedure
For RP, remove the card and replace. For fabric cards and line cards, close the ejector flaps.
If the condition does not clear, log into the Technical Support Website
support/index.html

FC-REDUNDANCY-LOST

Default Severity: Major (MJ) or Critical (CR), Non-Service-Affecting (NSA), or Service-Affecting (SA)
Logical Object: PORT
The Fabric Card Redundancy alarm occurs when one or more than one fabric card is removed.

Clear the FC-REDUNDANCY-LOST Alarm

Procedure
Either plug in 3 or all 4 fabric cards.
If the condition does not clear, log into the Technical Support Website
support/index.html

FEC-MISM

Default Severity: Major (MJ), Service-Affecting (SA)
Logical Object: PORT
FEC Mismatch alarm occurs when there is a FEC configuration mismatch in a span.

Clear the FEC MISM Alarm

Procedure
Step 1
Check the configured FEC type on the controller and the connected port.
Step 2
This alarm is triggered, when the FEC type of the controller and the connected port are different. Set the same
FEC type for the controller and the connected port.
The available FEC types are:
• Disable
Alarms Troubleshooting Guide for Cisco NCS 4000 Series
6
for more information or call Cisco TAC (1 800 553-2447).
for more information or call Cisco TAC (1 800 553-2447).
Alarm Management
athttp://www.cisco.com/cisco/web/
athttp://www.cisco.com/cisco/web/