Cisco NCS 4000 Series Panduan Pemecahan Masalah - Halaman 20

Jelajahi secara online atau unduh pdf Panduan Pemecahan Masalah untuk Router Jaringan Cisco NCS 4000 Series. Cisco NCS 4000 Series 44 halaman. Network convergence system
Juga untuk Cisco NCS 4000 Series: Membongkar, Memindahkan, dan Mengamankan Manual (40 halaman)

Halaman Cetak

Cisco NCS 4000 Series Panduan Pemecahan Masalah

Clear the EJECTOR-FLAPS-OPEN Alarm

Procedure

For RP, remove the card and replace. For fabric cards and line cards, close the ejector flaps.

If the condition does not clear, log into the Technical Support Website

support/index.html

FC-REDUNDANCY-LOST

Default Severity: Major (MJ) or Critical (CR), Non-Service-Affecting (NSA), or Service-Affecting (SA)

Logical Object: PORT

The Fabric Card Redundancy alarm occurs when one or more than one fabric card is removed.

Clear the FC-REDUNDANCY-LOST Alarm

Procedure

Either plug in 3 or all 4 fabric cards.

If the condition does not clear, log into the Technical Support Website

support/index.html

FEC-MISM

Default Severity: Major (MJ), Service-Affecting (SA)

Logical Object: PORT

FEC Mismatch alarm occurs when there is a FEC configuration mismatch in a span.

Clear the FEC MISM Alarm

Procedure

Step 1

Check the configured FEC type on the controller and the connected port.

Step 2

This alarm is triggered, when the FEC type of the controller and the connected port are different. Set the same

FEC type for the controller and the connected port.

The available FEC types are:

• Disable

Alarms Troubleshooting Guide for Cisco NCS 4000 Series

for more information or call Cisco TAC (1 800 553-2447).

Alarm Management

athttp://www.cisco.com/cisco/web/