Cisco Meraki CW9163E Installationshandbuch - Seite 25
Blättern Sie online oder laden Sie pdf Installationshandbuch für Drahtloser Zugangspunkt Cisco Meraki CW9163E herunter. Cisco Meraki CW9163E 28 Seiten.
Seite drucken
1. If the AP has a static IP address, the green signal LEDs will begin to flash on and off and you will not receive an IP address via DHCP.
2. Disconnect the Ethernet cable from the AP.
3. Associate to the SSID being broadcasted by the AP. If there are no other APs in the network within range the SSID may be appended with "-scanning".
4. Go to my.meraki.com in your web browser.
5. The MAC address on the back of the access point should match the physical address value on the my.meraki.com Overview page.
6. Once you have verified that the MAC address is correct on the overview tab, click the tab Static IP configuration.
7. Enter the username (serial number on the back of the AP) which is case sensitive and must include the dashes. (There is no password).
8. Make sure your AP is set to obtain a correct DHCP or static IP address configuration from your network.
Reference
https://documentation.meraki.com/MR
If you are still experiencing hardware issues, please contact Cisco Meraki support by logging in to the Dashboard and using the Help option near the top of the
page, then opening an email case or calling using the contact information on that page.
6 GHz Configuration
Broadcasting an outdoor wireless signal in the 6 GHz spectrum is not yet configurable on dashboard. This operation requires AFC feature
implementation that provides outdoor 6E APs with unlicensed access to the 6 GHz band by coordinating spectrum sharing with 6 GHz incumbents.
Options to enable the 6 GHz frequencies will be available in Radio Settings, for the regulatory domains that support 6 GHz.
1. Navigate Wireless > Configure > Radio Settings > RF Profiles
2.
Under RF Profiles, the existing outdoor profile can be modified or new profile can be created.
3.
6 GHz capability can be enabled for all SSIDs in the WLAN or enabled for select SSIDs.
for additional information and troubleshooting tips.
25