Cisco MX200 G2 Installationshandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Installationshandbuch für Konferenz-System Cisco MX200 G2 herunter. Cisco MX200 G2 6 Seiten. Wall mount
Auch für Cisco MX200 G2: Installationshandbuch (7 seiten), Installationshandbuch (8 seiten), Kurzreferenz-Handbuch (2 seiten), Kurzreferenz-Handbuch (2 seiten), Kurzreferenz-Handbuch (2 seiten), Handbuch "Erste Schritte (46 seiten)

Installing Cisco TelePresence MX200 G2 - Table Stand

Lead out the cables

Lead the cables downward and out at the back.

Snap on the cable

channel lid for strain relief.

Start up the system

•

Connect to power and LAN/Ethernet.

•

Switch on the system. The power switch is next

to the power connector at the rear side of the

system.

Wait while the unit starts up. Normally this takes a few minutes.

It may include automatic software upgrade and restart of the

Touch controller.

•

Follow the instructions on the Touch controller.

Cisco Spark: To find more information on how to get started

with Spark registered systems, visit

and look for Getting Started articles for room systems.

Other services: For further information on set-up and

configuration, download the Getting Started Guide from the

Cisco web site,

http://www.cisco.com/go/mx-docs

Never move the camera manually when power is switched on;

always use the camera control function on the Touch controller

to change the camera position.

http://help.ciscospark.com