Cisco MX200 G2 설치 매뉴얼 - 페이지 5

{카테고리_이름} Cisco MX200 G2에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco MX200 G2 6 페이지. Wall mount
Cisco MX200 G2에 대해서도 마찬가지입니다: 설치 매뉴얼 (7 페이지), 설치 매뉴얼 (8 페이지), 빠른 참조 매뉴얼 (2 페이지), 빠른 참조 매뉴얼 (2 페이지), 빠른 참조 매뉴얼 (2 페이지), 시작하기 매뉴얼 (46 페이지)

Installing Cisco TelePresence MX200 G2 - Table Stand

Lead out the cables

Lead the cables downward and out at the back.

Snap on the cable

channel lid for strain relief.

Start up the system

•

Connect to power and LAN/Ethernet.

•

Switch on the system. The power switch is next

to the power connector at the rear side of the

system.

Wait while the unit starts up. Normally this takes a few minutes.

It may include automatic software upgrade and restart of the

Touch controller.

•

Follow the instructions on the Touch controller.

Cisco Spark: To find more information on how to get started

with Spark registered systems, visit

and look for Getting Started articles for room systems.

Other services: For further information on set-up and

configuration, download the Getting Started Guide from the

Cisco web site,

http://www.cisco.com/go/mx-docs

Never move the camera manually when power is switched on;

always use the camera control function on the Touch controller

to change the camera position.

http://help.ciscospark.com