Cisco TelePresence MCU MSE 8510 Erste Schritte - Seite 10

Blättern Sie online oder laden Sie pdf Erste Schritte für Netzwerk-Hardware Cisco TelePresence MCU MSE 8510 herunter. Cisco TelePresence MCU MSE 8510 16 Seiten. Getting started

Seite drucken

To configure the MCU MSE 8510 to use a SIP registrar:

In the web interface, go to

Configure the settings you require, using the online help for further assistance.

Click

Apply changes

Before you configure the MCU MSE 8510 to use, and register

conferences to, a SIP registrar, you must set up the MCU MSE 8510 and

its conferences on that SIP registrar.

Step four: Add endpoints (optional)

One way to add participants to a conference that you create is to have the MCU MSE

8510 automatically call them when the conference starts. To do this, you configure

their endpoints on the MCU MSE 8510 . When you set up a conference, you can

choose the endpoints from the

entering each endpoint's details every time. Participants that are pre-configured for a

conference will automatically be called by the MCU MSE 8510 to join that

conference.

To define pre-configured endpoints:

In the web interface of the MCU MSE 8510 , go to

To add a H.323 endpoint, click



To add a SIP endpoint, click



To add a VNC screen, click



Configure the endpoint settings you require, using the online help for further

assistance.

Click

Add endpoint

Settings > SIP

Pre-configured participants

Add H.323

Add SIP

Add VNC

Configuring the MCU MSE 8510

list. This is easier than

Endpoints