Cisco TelePresence MCU MSE 8510 Erste Schritte - Seite 12

Blättern Sie online oder laden Sie pdf Erste Schritte für Netzwerk-Hardware Cisco TelePresence MCU MSE 8510 herunter. Cisco TelePresence MCU MSE 8510 16 Seiten. Getting started

Seite drucken

Calling participants in to a conference

To call participants in to a conference:

In the web interface of the MCU MSE 8510 , go to

name of an active conference.

On the

Participants

endpoint.

In the

Address

where there is no H.323 gatekeeper or SIP registrar, type the IP address,



host name, or SIP URI of an accessible endpoint on your network

if you are using an H.323 gatekeeper, enter the number registered with the



gatekeeper for the required endpoint

if you are using a SIP registrar, enter the number registered with the SIP



registrar for the required endpoint

Leave the other fields as their default values and click

MSE 8510 automatically connects to the endpoint.

If the endpoint is not configured to automatically answer calls, accept the call on

the endpoint.

Calling in to a conference

Participants can call in to conferences in either one of two ways:

if you have given the conference a numeric identifier and you are using an H.323



gatekeeper or SIP registrar, tell participants to dial the numeric identifier from

their endpoint to join that conference

participants can dial the IP address of the MCU MSE 8510 to access the auto



attendant of the MCU MSE 8510. Participants will see a menu of available

conferences on their video screen and will hear instructions

tab, click

Add participant

field:

Using the MCU MSE 8510

and click on the

Conferences

to call out to an H.323 or SIP

Call endpoint

. The MCU